Skip to product information
Photo - Primary
1/5
  • Photo - Primary
  • Photo - Primary
  • Photo - Unmounted
  • Photo - Primary
  • Line Art
SPC Performance 1/2 deg. FORD Camber/Caster Sleeve

SPC Performance 1/2 deg. FORD Camber/Caster Sleeve

$26.78
Part no. 23102 In stock
Special order In stock with our distributor. Usually ships in a few business days, and we email tracking as soon as it leaves.

Your vehicle

Year, make and model. Our techs check fitment against it before the order ships.

This sleeve will easily change Camber and/or Caster 0.50˚ for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the...

Full details and fitment

The details

About this part

This sleeve will easily change Camber and/or Caster 0.50˚ for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve and install a zero-degree sleeve (23109) to determine the required change, then install the correct degree sleeve. To split camber and caster adjustment, rotate sleeve 45°.

Installation Instructions
  • Easily change caster / camber or both at the same time
  • Front Adjustment Range: Camber/Caster ±0.50°
  • Front Adjustment Range: Camber/Caster ±0.50˚
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel