Skip to product information
Photo - Primary
1/6
  • Photo - Primary
  • Photo - Primary
  • Photo - Primary
  • Photo - Primary
  • Line Art
  • Photo - Unmounted
SPC Performance 1/4 deg. 4X4 Camber/Caster Sleeve

SPC Performance 1/4 deg. 4X4 Camber/Caster Sleeve

$17.53
Part no. 23131 In stock
Special order In stock with our distributor. Usually ships in a few business days, and we email tracking as soon as it leaves.

Your vehicle

Year, make and model. Our techs check fitment against it before the order ships.

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove...

Full details and fitment

The details

About this part

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install a zero degree sleeve 23139 to determine the change needed ,then install the correct sleeve.To split camber and caster adjustment, rotate sleeve 45deg. California Residents WARNING

Installation Instructions
  • Easily change caster / camber or both at the same time
  • Front Adjustment Range: Camber/Caster ±0.25°
  • Front Adjustment Range: Camber/Caster ±0.25˚
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel